Hi there, New user, so probably making basic errors but...
I set up my system to run using my home WiFi - and generally it sends consistent data, however, I paired a wireless sensor to the main controller and got good readings for a couple of days, then it started to misbehave. It reports still being paired, and if I manually pair it again readings are sent for a while, but at some point, usually withing 12 hours of me re-pairing it, the readings stop again. The main controller is still sending data, the control panel says she sensor is paired and the sensors battery seems fine, so I am at a loss to know what is going wrong. Any thoughts welcome...
Hi Mike
It looks like there's a more recent firmware version for your sensor ( 2024072400 ), so I have set it to update ... it will manage to do this via your control unit, as long as the sensor is also within range of your home router. Could you wake the main control unit, then just press the button on the sensor to nudge the connection? When the sensor is updating FW the LED will flicker.
You could turn on "wireless sensor debug" first on the control unit to get a beep when the sensor connects to it, for some feedback.
Chris
Sorry for the slow reply, I have been away for a few days. It does look as if your update has done the trick as the sensor has been sending data for several days now. So thank you. hopefully that's a problem solved.
I set up my system to run using my home WiFi - and generally it sends consistent data, however, I paired a wireless sensor to the main controller and got good readings for a couple of days, then it started to misbehave. It reports still being paired, and if I manually pair it again readings are sent for a while, but at some point, usually withing 12 hours of me re-pairing it, the readings stop again. The main controller is still sending data, the control panel says she sensor is paired and the sensors battery seems fine, so I am at a loss to know what is going wrong. Any thoughts welcome...
It looks like there's a more recent firmware version for your sensor ( 2024072400 ), so I have set it to update ... it will manage to do this via your control unit, as long as the sensor is also within range of your home router. Could you wake the main control unit, then just press the button on the sensor to nudge the connection? When the sensor is updating FW the LED will flicker.
You could turn on "wireless sensor debug" first on the control unit to get a beep when the sensor connects to it, for some feedback.
Chris
Sorry for the slow reply, I have been away for a few days. It does look as if your update has done the trick as the sensor has been sending data for several days now. So thank you. hopefully that's a problem solved.