Harvst Web App

Harvst Web App »
Firmware update : 202306 June releases

avatar
Chris
ADMIN
05 Jul, 07:49
- Feature : [2023062900] Allow user to disable pump fault shutdown
Go to device control panel settings and turn off the pump shutdown if it's reporting a fault in error. There is a risk that a genuine pump fault will cause a fuse to blow, but the fuse is replaceable so this is not terminal.

- Feature [2023062900] : Store log data on device and send to cloud for diagnostics
Detailed diagnostics can be turned on by Harvst admin for online-mode boxes, so that we can ascertain whether there are any problems with wifi network etc.

- Feature [2023062900] : Warn user when setting a local access point password; this is not the home wifi password and will prevent you from accessing the control unit without it.

- Bugfix [2023062703]: Disable pump fault shutdown if there is no pump
Pump shutdown was stopping watering sometimes if there was no pump ( mains water mode )

- Bugfix [2023062703]: Pump stops after 1 second if aux ports set to start at same time as watering

- Bugfix : Extra long pumping times can put too much drain on the battery. The low-battery pump stop level was set too low, which causes batteries to drain too much. The box recovers when charged again but it's not great for the battery. This fix raises the shutdown level to a better voltage ( 13v - which might appear low for a li-ion battery but under load an OK battery will hit this level ).

- Feature [2023060700]: Firmware support for latching solenoids. Choose the solenoid type on the device control panel.


Register for a free account and join the Harvst community.

Log in / register