- We have implemented a pump fault detection mechanism which will shut down the pump if it is drawing too much current. The goal is to prevent the control unit fuse from blowing. If a mini pump fails ( perhaps water ingress ), you will see a red fault message on the device dashboard. If your control unit is in online mode, you will also receive an email.
- You can now extend the "priming time" for the low water tank alert. If your irrigation setup takes more than ten seconds to clear the air, the low tank alert can be triggered prematurely. On the device control panel ( or web app ), choose 15 or 20 seconds for the respective zone watering settings.
- You can clear the "last active time" for the aux outputs; makes it easier when testing the logic for timer and sensor driven watering / heating / lights.
- There was a bug where lights came on for a second when lights and pump were both due to turn on at the same time. Now the pump runs and then the lights come on when the pump has finished running.
Register for a free account and join the Harvst community.
- You can now extend the "priming time" for the low water tank alert. If your irrigation setup takes more than ten seconds to clear the air, the low tank alert can be triggered prematurely. On the device control panel ( or web app ), choose 15 or 20 seconds for the respective zone watering settings.
- You can clear the "last active time" for the aux outputs; makes it easier when testing the logic for timer and sensor driven watering / heating / lights.
- There was a bug where lights came on for a second when lights and pump were both due to turn on at the same time. Now the pump runs and then the lights come on when the pump has finished running.