We have identified a problem with firmware version 2025042900 for 240v powered systems only [version 11 only, with the buttons on the front panel], whereby the latching valves were turning off when they should have been turning on.
For pumped systems, this would be manifesting as "the wrong zone pumping".
For mains water systems, this would be manifesting as "continual watering unless asked to water, at which point it stops", or alternatively "watering never stops".
We've fixed in today's version ( 2025051900 ) - for those of you with mains 240v power and pumped systems, you may want to check your zone 1 / zone 2 is still working as expected, and if not, switch them around ( or update the settings on the device appropriately ).
Apologies for this ( potentially wet! ) hiccup.
Register for a free account and join the Harvst community.
We have identified a problem with firmware version 2025042900 for 240v powered systems only [version 11 only, with the buttons on the front panel], whereby the latching valves were turning off when they should have been turning on.
For pumped systems, this would be manifesting as "the wrong zone pumping".
For mains water systems, this would be manifesting as "continual watering unless asked to water, at which point it stops", or alternatively "watering never stops".
We've fixed in today's version ( 2025051900 ) - for those of you with mains 240v power and pumped systems, you may want to check your zone 1 / zone 2 is still working as expected, and if not, switch them around ( or update the settings on the device appropriately ).
Apologies for this ( potentially wet! ) hiccup.