Hi Techielass, we now mount the PSU on the back, and there should be a hole about 20mm in diameter for the 12v plug to come in to the control unit. If you don't have that hole, could you send a photo of your rear panel?
Hi. I have a hole that with some persuasion I could force the 12v plug through. But there are no mounting holes for the power supply.
Looking from the back there are 2 unused holes in the back panel to the right but they don’t line up with the power supply and the 12v wire wouldn’t reach anyhow.
Where does the pay mount please? A picture would be useful
Just building my S10 greenhouse and wondering about the power supply placement. Should it be on the inside of the greenhouse or mounted to the back.
The reason I ask is I don't seem to have any way of getting the power supply cable out if I mount the unit inside.
Thanks!
Looking from the back there are 2 unused holes in the back panel to the right but they don’t line up with the power supply and the 12v wire wouldn’t reach anyhow.
Where does the pay mount please? A picture would be useful